Mitsubishi Exhaust Repairs & Replacement
Exhaust repairs and replacement parts for Mitsubishi cars at our Brierley Hill exhaust centre. Whether it's a blowing Outlander flexi, a rusted L200 back box or a split Shogun centre section, we check the whole exhaust first. If the rest of it is sound, we can often repair or replace just the failed section.

Mitsubishi models we repair
We supply and fit standard replacement exhaust parts for most Mitsubishi models, and repair what can be repaired. Send us your registration and we'll check the right parts for your exact model and engine.
- Branch
- LTC Tyres & Exhausts Brierley Hill
- Address
- 350 Brettell Lane, Brierley Hill DY5 3JN
- Phone
- 01384 485511
- Open
- Mon–Fri 9am–6pm, Sat 9am–5pm
- Directions
- Open in Google Maps ↗

Mitsubishi exhaust flexi pipe repairs
A blowing flexi pipe is the exhaust repair we're asked about most. The flexi is the braided flexible joint near the front of the exhaust that lets it move with the engine. Once it cracks you'll hear a blow or a ticking noise from under the front of the car, usually worst when cold.
In most cases we cut out the failed flexi and weld a new flexi section into your existing Mitsubishi front pipe, so you don't need a complete new front pipe. We check the pipework either side first, so the repair lasts.
- Mitsubishi flexi pipe repair and replacement
- Blowing front pipes and downpipe flexis
- Cracked or split flexi braiding
- Flexi sections welded into the existing pipe


Mitsubishi Exhaust Fitting & Repairs
We check the whole exhaust and show you what's failed before any work is done. Many common Mitsubishi exhaust repairs can be done the same day, subject to parts and workshop availability.
Back Box & Exhaust Replacement
From a single back box or silencer to a complete standard Mitsubishi system, supplied and fitted.
Replacement parts →Centre sections & front pipes
Corroded or broken middle sections replaced, often without needing a complete new exhaust.
Repair or replace →Catalytic converters
Replacement catalytic converters for Mitsubishi cars, supplied and fitted with the surrounding pipework checked at the same time.
Catalytic converters →Exhaust Leaks, Welding, Brackets & Hangers
Exhaust leaks welded, broken brackets repaired and snapped hangers replaced, where the rest of the exhaust is sound.
All exhaust repairs →Not sure what's wrong?
Send a short video of the noise and your Mitsubishi registration on WhatsApp and we'll point you in the right direction.
WhatsApp us →
Looking for a custom Mitsubishi exhaust?
Want more than a standard replacement? Our Proflow stainless steel exhausts are built at Brierley Hill to suit your Mitsubishi. You choose the sound and the tailpipe style, from a single custom back box to a full cat-back system. We've built custom stainless exhausts for the Shogun / Pajero, and can build for the L200, Outlander or Lancer Evolution.
- Lifetime warranty on qualifying Proflow stainless steel components, subject to warranty terms
- 0% finance available
- Ask us for an estimated fitting time when we quote
Mitsubishi Shogun / Pajero: flex, middle and rear with a side-exit tailpipe Read the build →Signs your Mitsubishi exhaust needs attention
- A deep roar or ticking noise when you pull away
- Rattling or knocking from underneath, especially over bumps
- A smell of exhaust fumes inside the car
- The exhaust is hanging low or has dropped
- An MOT advisory or failure for the exhaust or emissions
Mitsubishi exhaust repairs: FAQs
Can you repair a Mitsubishi exhaust without replacing the whole system?
Often, yes. Most Mitsubishi exhausts are made in sections, so if the rest of the system is sound we can replace just the failed back box, centre section or flexi, or weld a small leak.
How much does an exhaust repair cost?
It depends on your vehicle and which section has failed. Send us your registration and a short description on WhatsApp, and we'll check parts and give you a fitted price before any work is done.
Can you fix a blowing flexi on my Mitsubishi?
Usually, yes. We cut out the cracked flexi and weld in a new flexi section, so you don't need a complete new front pipe. If the pipe either side is too corroded, we'll show you and quote for that section instead.
Can a blowing exhaust fail the MOT?
Yes. A major exhaust leak or an insecure exhaust can fail the MOT, and the emissions test checks the exhaust gases too. If your exhaust is louder than usual, get it checked before your test.
Mitsubishi exhaust blowing? Get it checked
Call Phil and the Brierley Hill team and our exhaust fitters, or send your registration on WhatsApp and we'll come back with a price.
